Canon imagePRESS C1 P Service Manual page 1159

Chapter 16
Subheading
VP-TXT
UI-PRINT
WUEV-SW
WUEV-INT
WUEV-POT
WUEV-RTR
SJB-UNW
UI-RSCAN
UI-EPRNT
UI-WEB
WEBV-SW
PASCL-TY
16-262
COPIER > OPTION > BODY
Change the vector processing for characters.
Change the vector processing for characters in the scalable PDF.
Setting range: 0 to 99
Standard value: 1
Set whether or not to display the print job screen in the control panel.
This is a switch to set whether or not to display the print job screen in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the print job screen.
1: Display the print job screen.
Standard value: 1
Set whether or not to provide a notice of the sleep mode operation.
Set whether or not to provide a notice of the sleep mode operation to the DS application on
network when the copier main unit entered the sleep mode or recovered from the sleep mode.
Setting range
0: Provide a notice.
1: Do not provide a notice.
Standard value: 0
Set the interval to provide a notice of the sleep mode operation.
Setting range: 0 to 65535
Standard value: 600
Set a port number for the destination to provide a notice of the sleep mode operation.
Setting range: 1 to 65535
Standard value: 11427
Set a range to provide a notice of the sleep mode operation.
Set the number of routers that can be used for a notice of the sleep mode operation.
Setting range: 0 to 254
Standard value: 3
Switch the number of reserved jobs for secure print jobs.
Switch the number of reserved jobs for secure print jobs to 50 or 90.
Setting range
0: 50
1: 90
Standard value: 0
Set whether or not to display the remote scan screen in the control panel.
This mode is used to set whether or not to display the remote scan screen in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value: 1
Set whether or not to display the expansion printing screen in the control panel.
This mode is used to set whether or not to display the expansion printing screen (EFI print screen)
in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value: 1
Set whether or not to display the Web browser screen in the control panel.
This mode is used to set whether or not to display the Web browser screen in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value: 1
Set whether or not to prohibit the use of the WEBDAV function.
When this mode is set to 1(ON), the WEBDAV function becomes unavailable. (The WEBDAV
items are deleted from the following mode.
- User mode --> destination table specification setting --> registration of destinations --> file -->
"WEBDAV" in the protocol
- User mode --> "use the chunk divided transmission for WEBDAV transmission" in the
transmission specification setting items
Setting range
0: Use the WEBDAV function.
1: Do not use the WEBDAV function.
Standard value: 0
[Reference]
Although the WEBDAV function is included in the main unit as a standard function, there are
cases when this function is not used in order to reduce the memory usage.
Set the paper type used for the automatic gradation correction (PASCAL).
This mode is used when executing PASCAL for the paper which is not recommended for the
destination.
Setting range
1: CLC-SK 80g paper (Countries other than USA/EU. Mainly Japan)
2: Hammermill 105g paper (for USA)
3: Neusiedler 100g paper (for EU)
Do not change the setting in a normal condition.
Contents Level
2
2
2
2
2
2
2
2
2
2
2
2