Outline - Canon imagePRESS C1 P Service Manual

17.1 Outline

17.1.1 Types of System Software
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
Types of System Software
Main Controller
Language Module
Remote UI Contents
Boot Program
MEAP Library
Voice Dictionary
WEB Browser
DC Controller
Reader Controller
Time Stamp Module *
Media Brand Information File
Simple NAVI
WebDAV Contents
Multi-port FAX* *
OCR Dictionary
Encryption Communication Key,
Certificate/CA Certificate
ADF Controller
Finisher Controller
* 100V machines only
System Software Description
Name
SYSTEM 1 for inside Japan and 1 for outside Japan
Main controller also controls the G3FAX board (1line).
LANGUAGE This is the message data displayed in the local UI. This module needs to be installed for each language.
Installed languages can be changed from 'User Mode > Common Settings > Language Switch'. The
version of the module must be consistent with that of the system.
RUI This is the Remote UI contents accessed from Web browser for the operation of the main body.
Installed languages can be selected from the top page of the Remote UI.
BOOT Boot system software is common in all the models.
This software can be upgraded by ROM-DIMM replacement.
MEAPCONT MEAPCONT is the standard library to use MEAP.
TTS This is the voice dictionary data used in the environment where the voice guidance board is mounted.
This dictionary is used when adding the Voice Guidance Kit (optional).
BROWSER BROWSER is the data used for WEB browser display which is the optional function. This is used
when adding the WEB Browser Expansion Kit (optional).
DCON Downloading of DCON is performed by way of the main controller assembly. As the BootROM is
installed separately, it can be re-tried even in the case of failure in downloading of DC controller PCB.
RCON Downloading of RCON is performed by way of the main controller assembly. As the BootROM is
installed separately, it can be re-tried in the case of failure in downloading of reader controller PCB.
(Downloading of Rcon is not available unless the DC controller is started properly.)
TSTMP This is the module used for the function to send PDF with electronic signature.
This function is used when adding the Time-Stamp PDF Expansion Kit (optional*).
MEDIA This is the file that includes the media brand information selected as the media type. Upgrading of this
file enables the addition of the available media brands.
HELP This is the data to display Simple Navi (operation supporting function).
WebDAV This is the module used for the function to send input image to the WebDAV server on internet/intranet
using WebDAV protocol.
G3FAX This is the control software used for the multi-port FAX board. This software can be upgraded by
ROM-DIMM replacement, and is used when adding the multi-port FAX board/Y1 (optional*).
SDICT This is the dictionary used for conversion of the image data read from the reader assembly to character
codes (OCR processing).
This is used when adding the Searchable PDF Kit (optional).
KEY This function is used for SSL/e-RDS communication.
KEY means the key and the certificate used for encrypted communication on the network.
CPU This is used when adding the DADF-R1 (optional).
Special service tool (Downloader PCB: FY9-2034) is required.
FIN_CON This is used when adding the Finisher-AA1, Saddle Finisher-AA2 (optional).
Special service tool (Downloader PCB: FY9-2034) is required.
T-17-1
Chapter 17
0013-8721
17-1