Canon imagePRESS C1 P Service Manual page 1216

Subheading
FXLW-TH2
FXEX-TH1
FXEX-TH2
7. DRBL-1
<How to see periodically replaced/durable parts counter>
This machine has periodically replaced/durable parts counter (PRDC-1/DRBL-1/DRBL-2), which can be used to check the target of replacing periodically replaced/
durable parts.
<Example>
[2]
[1]
F-16-37
[1]: Parts name is displayed. Primary charging wire in the example.
[2]: Counter value (actual usage of sheets) is displayed. Clear the value by clear key at replacement of parts.
[3]: Limit value (target of replacement) is displayed. The value can be changed by selecting item and pressing the numeric pad. After changing, press OK key.
[4]: The ratio the counter value to limit value is displayed.
[5]: One (!) is displayed when the ratio is 90 to 100%. Two (!) is displayed at 100% or more. Not displayed in the example.
[6]: Predicted number of days to replacement is displayed. 82 days in the example.
<DRBL-1> items shown below are maintained in the DC controller PCB and main controller PCB.
- Main controller PCB
T-CLN-BD, TR-BLT, TR-ROLL, 1TR-STC, 2TR-INRL, CLN-BLD, CL-SUPS, BS-SL-F, BS-SL-R, C1-PU-RL, C1-SP-RL, C1-FD-RL, C2-PU-RL, C2-
SP-RL, C2-FD-RL, C3-PU-RL, C3-SP-RL, C3-FD-RL, C4-PU-RL, C4-SP-RL, C4-FD-RL, M-PU-RL, M-SP-RL, FX-IN-BS, FX-WEB, FX-EX-RL, FX-
EX-BS, DLV-UCLW, DLV-LCLW, FX-LB-ST, FX-LB-PD, FX-LB-PC, FX-LB-OR, FX-EX-C1, DEV-CL, BS-SL-F2, BS-SL-R2, DMR-CLN, 2TR-BLD,
2TR-CLN
- DC controller PCB
DV-UNT-C, DV-UNT-Y, DV-UNT-M, DV-UNT-K, FX-UP-RL, FX-BL-CT, TB-CLN2, ITB-CLN1
When replacing the main controller PCB or DC controller PCB, execute the service mode COPIER>FUNCTION>MISC>P-PRINT and keep the printout.
Counter values in the service mode <DRBL-1> are classified into the following five types.
Type 1:
B&W Size S: 1 count Full color Size S: 4 counts
Size L: 2 counts Size L: 8 counts
Type 2:
B&W Size S: 1 count Full color Size S: 3 counts
Size L: 2 counts Size L: 6 counts
Type 3:
B&W Size S: 1 count Full color Size S: 1 count
Size L: 2 counts Size L: 2 counts
Type 4:
B&W / Full color: 1 count
Type 5:
B&W Not counted Full color 1 count
COPIER > COUNTER > PRDC-1
Inlet sub thermistor counter
Estimated life: 500,000-print
Count type: Type 3
S=1, L=2
Outside heating main thermistor counter
Estimated life: 500,000-print
Count type: Type 3
S=1, L=2
Outside heating sub thermistor counter
Estimated life: 500,000-print
Count type: Type 3
S=1, L=2
[3]
[4] [5] [6]
Contents
Chapter 16
Level
1
1
1
16-319