Common Settings - Canon imagePRESS C1 P Service Manual

Chapter 1
2. Paper Type Management Settings
This feature enables to print with most optimal printing characteristics for each paper type by registering the characteristics of each paper type in the printer engine.
Furthermore, parameters such as for curl correction and image position control can be changed for each paper type.
This setting can be found in the following menu tree of the panel setting display.
- Initial Setup / Save key > System Control Settings > Paper Type Management Settings
The details of each setting are shown in the following table.
Display
Name
Default display
Category
Default display
Default display Grammage
Default display Form
Default display Surface property
Creep (displacement
Default display
correction)
Displayed by service
Curl correction
switch (*1)
Displayed by service Media floatation fan air
switch (*1) volume control
Displayed by service
Image position control
switch (*1)
Displayed by service Secondary transfer voltage
switch (*1) control
Displayed by service
Uneven Gloss Correction
switch (*1)
*1
This item is displayed by executing service mode (COPIER > OPTION > BODY > IMAG-ADJ)

1.2.3.11 Common Settings

imagePRESS C1+ (Printer) / imagePRESS C1+
* Indicates the default setting.
*1 Indicates items that appear only when the appropriate optional equipment is attached.
*2 Indicates items that appear only when Display Remaining Toner Error Message in System Settings (from the
Additional Functions screen) is set to 'On'.
*3 Device Information Delivery Settings
Among multiple machines on the network, registration of device information (administration data) in 1 parent machine [1] can transmit the same data to child
machines [2]. The child machines to which the device information was transmitted receives and updates the information.
1-20
Item Settings
Enter any name.
Editing prohibited (standard/
custom)
64 to 256 g / m2
Standard paper / Index paper /
Punched paper
High-quality paper / recycle
paper / coated paper (one-side)
/ coated paper (both-sides) /
embossed paper / vellum paper
/ film / label / cotton paper
0.00 to 2.00 mm
curl down / curl up (factory
default: 0)
weak / medium / strong
(factory default: medium)
test print output / leading edge
registration position control /
left end registration position
control
+ / - 10 (factory default: 0)
-2 to +2, 1*+ : increase gloss- :
decrease gloss
T-1-12
Purpose
To register the thickness of the
paper.
To register the style of the
paper.
To register the type of the
paper.
To control the degree of
displacement for each type of
paper when printed
documents are bound up by
the saddle stitch.
degree of curling of the paper.
The air volume at which the
paper is fanned can be
modified when faulty feeding
occurs while using the side
paper deck - AA1 or when
uneven transfer occurs.
To controls the image position
on the paper.
To control the secondary
transfer bias when faulty
image (uneven density, white
spot, etc.) occurs.
To adjust glossiness of
paper.Changing value
switches the fixing
temperature.
Remedy Service Mode
The degree of curling has
7 levels upward and 7
more levels downward.
Select [strong] when jam
or double feeding occurs,
and [weak] when paper
gets curled more than
necessary or when
uneven transfer occurs.
Change the value to a
COPIER >
native value. (The value
OPTION > BODY
1 in this case translates to
> 2TR-RVON
100V.)
0020-8552