Registration Roller (Rubber) - Toshiba e-STUDIO182 Service Manual

(4) Take off the cover-A, cover-B, spring and
flange.
Note:
When assembling the drawer pickup clutch,
adjust the position of the hook of the spring
and the covers so that the stopper of the
cover-B and the center of the rib of the
cover-A are aligned.
9.5.16

Registration roller (rubber)

(1) Take off the transfer/separation charger.
P.10-16 "10.7.12 Transfer/Separation
charger"
(2) Remove 1 clip and take off 1 gear and the
registration roller (rubber) while sliding them
to the front side.
e-STUDIO182/212/242
PAPER FEEDING SYSTEM
Rib
Registration roller (rubber)
Clip
© 2009 TOSHIBA TEC CORPORATION All rights reserved
9 - 22
Cover-B
Cover-A
Fig. 9-43
Cover-B
Slit
Cover-A
Stopper
Fig. 9-44
Fig. 9-45