3. Enter the ID of the virtual router in the "VRID" input box.
4. Click the "Create" button. A new row is inserted in the table.
5. Select the "VRID Tracking" check box to monitor the VRID.
6. Click the "Set Values" button. To configure the virtual router, click on the "Configuration"
tab.
5.7.7.2
Configuration
Introduction
On this page, you configure the virtual router.
Note
This function is available only with layer 3.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
425