Siemens SCALANCE XM-400 Configuration Manual page 326

Configuring with Web Based Management
5.5 The "Layer 2" menu
Description of the displayed boxes
The page contains the following box:
● GMRP
Enable or disable the GMRP function.
Table 1 has the following columns:
● 1st column
Shows that the settings are valid for all ports of table 2.
● Setting
Select the setting from the drop-down list. You have the following setting options:
– Enabled
– Disabled
– No change
● Copy to table
If you click the button, the settings are adopted for all ports of table 2.
Table 2 has the following columns:
● Port
This column shows all the ports available on the device as well as the link aggregations.
● Setting
With this check box, you enable or disable GMRP for the port or link aggregation.
Steps in configuration
Enabling the sending of GMRP frames for an individual port
1. Select the "GMRP" check box.
2. Select the check box in the relevant row in table 2.
3. To apply the changes, click the "Set Values" button.
Enabling the sending of GMRP frames for all ports
1. Select the "GMRP" check box.
2. In the "Setting" drop-down list, select the "Enabled" entry.
3. Click the "Copy to table" button. The check box is enabled for all ports in table 2.
4. To apply the changes, click the "Set Values" button.
326
Enables the sending of GMRP frames.
Disables the sending of GMRP frames.
Table 2 remains unchanged.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12