Siemens SCALANCE XM-400 Configuration Manual page 414

Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
Settings
Figure 5-18
● Route Map (Name/Seq. No.)
Select a route map.
The created route maps are available to you.
● Type
Select the basis for the filtering:
– Interface
– Metric
– Tag
– Route Type
– metric type
● Interface
Select an interface.
This box is active only if you have selected the "Interface" entry in the "Type" drop-down
list.
● Metric
Enter a value for the metric.
This box is active only if you have selected the "Metric" entry in the "Type" drop-down list.
● Tag
Enter a value for the tag.
This box is active only if you have selected the entry "Tag in the "Type" drop-down list.
414
Filtering route maps and metric
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12