Ingress Rules - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.8 The "Security" menu
5.8.6.3

Ingress Rules

Introduction
On this page, you specify the ACL rules according to which incoming frames are handled by
interfaces. You specify the ACL rules in the "Rules Configuration" tab.
Description of the displayed boxes
The page contains the following boxes:
● Interface
Select the required interface from the drop-down list. The available interfaces depend on
your device.
To select a VLAN interface, an IP interface must be configured.
Note
If you use a VLAN interface, the ACL rule applies to all ports that belong to the VLAN.
● Add Rule
In the drop-down list select the ACL rule to be assigned to the interface.
472
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12