Siemens SCALANCE XM-400 Configuration Manual page 119

Description of the displayed values
The table has the following columns:
● IP Address
Shows the IPv4 address of the neighbor router in this network.
● Router ID
Shows the ID of the neighbor router. The two addresses can match.
● Status
Shows the status of the neighbor router. The status can adopt the following values:
– unknown
– down
– attempt and init
– two-way
– exchangestart, exchange and loading
– full
● Assoc. Area Type
Shows the area type via which the neighbor-neighbor relation is maintained. The following
area types exist:
– Standard
– Stub
– NSSA
– Backbone
● Priority
Shows the priority of the neighbor router. This is only significant when selecting the
designated router on a network. For virtual neighbor routers, this information is irrelevant.
● Hello suppr
Shows the suppressed Hello packets to the neighbor router. This field normally displays
"no".
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Status of the neighbor router is unknown.
The neighbor router cannot be reached.
Brief status during initialization
Two-way receipt of Hello packets. Specification of the designated router and the
designated backup router.
Status during exchange of the LSAs
The database is complete and synchronized within the area. The routes can now be
detected.
Note
Normal status
If the partner router is a designated router or a designated backup router, the status is
"full". Otherwise the status is "two-way".
Configuring with Web Based Management
5.3 The "Information" menu
119