Faults - Siemens SCALANCE XM-400 Configuration Manual

Description of the buttons and input boxes
"Clear" button
Click this button to delete the content of the event log file. All entries are deleted regardless of
what you have selected under "Severity Filters".
The display is also cleared. The restart counter is only reset after you have restored the device
to the factory settings and restarted the device.
Note
The number of entries in this table is restricted to 1200. The table can contain 400 entries for
each severity. When this number is reached, the oldest entries of the relevant severity are
discarded. The table remains permanently in memory.
"Show all" button
Click this button to display all the entries on the WBM page. Note that displaying all messages
can take some time.
"Next" button
Click this button to go to the next page.
"Prev" button
Click this button to go to the previous page.
Drop-down list for page change
From the drop-down list, select the page you want to go to.
"Update" button
Refreshes the display of the values in the table.
5.3.6

Faults

Error status
if an error occurs, it is shown on this page. On the device, errors are indicated by red fault LED
lighting up.
Internal errors of the device and errors that you configure on the following pages are indicated:
● System > Events"
● "System" > Fault Monitoring"
Errors of the "Cold/Warm Start" event can be deleted by a confirmation.
The calculation of the time of an error always begins after the last system start.
If there are no errors present, the fault LED switches off.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.3 The "Information" menu
89