Port-Based Vlan - Siemens SCALANCE XM-400 Configuration Manual

Steps in configuration
1. Click "GVRP" check box.
2. Click the check box after the port in the "Setting" column to enable or disable GVRP for this
port.
Repeat this for every port for which you want to enable or disable the function.
3. Click the "Set Values" button.
5.5.4.3

Port-based VLAN

Processing received frames
On this page, you specify the configuration of the port properties for receiving frames.
Description of the displayed boxes
Table 1 has the following columns:
● Port
Shows that the settings are valid for all ports.
● Priority / / Port-VID / Acceptable Frames / Ingress Filtering
Select the setting in the drop-down list. If "No Change" is selected, the entry in table 2
remains unchanged.
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.5 The "Layer 2" menu
261