Ipv6 Routing; Ipv6 Routing Table - Siemens SCALANCE XM-400 Configuration Manual

5.3.14

IPv6 routing

5.3.14.1

IPv6 Routing Table

Introduction
This page shows the IPv6 routes currently being used.
Description of the displayed values
The table has the following columns:
● Destination Network
Shows the destination address of this route.
● Prefix Length
Shows the prefix length of this route.
● Gateway
Shows the gateway for this route.
● Interface
Shows the interface for this route.
● Metric
Shows the metric of the route. The higher value, the longer packets require to their
destination.
● Routing Protocol
Shows the routing protocol from which the entry in the routing table originates. The following
entries are possible:
– connected: Connected routes
– Static: Static routes
– RIPng: Routes via RIPng
– OSPFv3: Routes via OSPFv3
– other: Other routes
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.3 The "Information" menu
131