Siemens SCALANCE XM-400 Configuration Manual page 185

Description
The page contains the following boxes:
● Pool ID
Select the required IPv4 address band.
● Client identification method
Select the method according to which a client is identified.
– Ethernet MAC
– Client ID
● Value
Enter the MAC address (Ethernet MAC) or the client ID of the client.
The table has the following columns:
● Select
Select the check box in the row to be deleted.
● Pool ID
Shows the number of the IPv4 address band.
● Identification method
Shows whether the client is identified by its MAC address or the client ID.
● Value
Shows the MAC address or client ID of the client.
● IP Address
Specify the IPv4 address that will be assigned to the client. The IPv4 address must be within
the IPv4 address band.
Procedure
Creating static leases
1. Select a Pool ID.
2. Select the Client identification method.
3. Enter the value.
4. Click the "Create" button.
5. Specify the IPv4 address that will be assigned to the client.
6. Click the "Set Values" button.
Deleting static leases
1. Enable the "Select" check box in the row to be deleted.
Repeat this for all entries you want to delete.
2. Click the "Delete" button.
The entry is deleted.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
The client is identified by its MAC address.
The client is identified by a freely defined DHCP client ID.
Configuring with Web Based Management
5.4 The "System" menu
185