Interfaces - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
5.6.9.4
Interfaces
Overview
On this page, you can configure OSPFv2 interfaces.
Note
This function is available only with layer 3.
Description of the displayed boxes
The page contains the following boxes:
● IP Address
Select the IPv4 address of the OSPFv2 interface from the drop-down list.
● Area ID
list.
Note
For the secondary interface select the same Area ID as for the corresponding primary
interface.
The information whether an address type is primary or secondary can be found in the
"Address Type" column on the "Layer 3 (IPv4) > Subnets > Overview" page.
Select the ID of the area that is connected to the OSPFv2 interface from the drop-down list.
The table has the following columns:
● Select
Select the row you want to delete.
● IP address
Shows the IPv4 address of the OSPFv2 interface
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Select the ID of the area that is connected to the OSPFv2 interface from the drop-down
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
385
Advertisement
Table of Contents
