Settings
Figure 5-19
● Route Map (Name/Seq. No.)
Select a route map.
● IP Address
Enter the IP address of the router to which the routing information will be sent next.
The table has the following columns:
● Select
Select the row you want to delete.
● IP Address
Shows the IP address of the next router.
5.7.5.5
Einstellen
On this page, you specify whether or not the routing information will be changed by a route
map.
You can only change the information of a "Permit" route map.
If, for example, you have filtered based on a certain metric, you can change the value of the
metric here. The routing information is then forwarded with the new value.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Route Maps Next Hop Match
Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
417