Interface Tracking - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Steps in configuration
1. Select the ID of the virtual router.
2. Enter the IPv6 address that the virtual router will monitor.
3. Click the "Create" button. A new entry is generated in the table.
5.7.7.5
Interface Tracking
Introduction
On this page, you configure the monitoring of interfaces.
When the link of a monitored interface changes from "up" to "down", the priority of the assigned
VRRP interface is reduced. You configure the value by which the priority is reduced on the
page "Layer 3 > VRRP/VRRPv3 > Configuration".
When the link of the interface changes back from "down" to "up", the original priority of the
VRRP interface is restored.
Note
This function is available only with layer 3.
Description of the displayed values
The page contains the following boxes:
● Interface
From the drop-down list, select the interface to be monitored.
● Track ID
Enter a track ID.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
429
Advertisement
Table of Contents
