Vrrpv3; Router - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
Steps in configuration
1. Select the required interface from the "Interface" drop-down list.
2. In the "Track ID" box, enter the required ID.
3. Click the "Create" button.
4. Select an ID from the "Track-ID" drop-down list:
5. In the "Track Interface Count" enter the number of interfaces.
6. Click the "Set Values" button.
7. Link the monitoring to a VRRP interface in the "Configuration" tab.
5.6.8

VRRPv3

5.6.8.1

Router

Introduction
Using the "Create" button, you can create new virtual routers. A maximum of 52 Virtual routers
can be configured. You can configure other parameters on the "Configuration" tab.
Note
● This function is available only with layer 3.
● Simultaneous operation of VRRP and VRRPv3 is not possible.
● Select the "VRRPv3" check box to configure VRRPv3.
● You can use VRRPv3 on VLAN interfaces. Router ports are not supported.
372
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12