Dst Configuration - Siemens SCALANCE XM-400 Configuration Manual

5.4.11.3

DST Configuration

Configuring the daylight saving time switchover
On this page, you can configure the entries for the daylight saving time changeover. As result
of the changeover to daylight saving or standard time, the system time for the local time zone
is correctly set.
You can define a rule for the daylight saving time changeover or specify a fixed date.
Settings
Note
The content of this page depends on the selection in the "Type" box.
The boxes "DST No.", "Type" and "Name" are always shown.
● DST No.
Select the type of the entry.
● Type
Select how the daylight saving time changeover is made:
– Date
– Recurring
● Name
Enter a name for the entry.
The name can be a maximum of 16 characters long.
Settings with "Date" selected
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
You can set a fixed date for the daylight saving time changeover.
This setting is suitable for regions in which the daylight saving time changeover is not
governed by rules.
You can define a rule for the daylight saving time changeover.
This setting is suitable for regions in which the daylight saving time always begins or
ends on a certain weekday.
Configuring with Web Based Management
5.4 The "System" menu
199