Static Routes - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
● Prefix Length
Shows the prefix length.
● Generated Address
Shows the IPv6 address formed from the prefix name, prefix and prefix length.
5.7.4
Static Routes
On this page, you configure static IPv6 routes.
Description
The page contains the following:
● Destination Network
Enter the network address of the destination that can be reached via this route.
● Prefix Length
Enter the number of left-hand bits belonging to the prefix
● Gateway
Enter the IPv6 address of the gateway via which this network address is reachable.
● Administrative Distance
Enter the administrative distance for the route. The administrative distance corresponds to
the quality of a connection, based for example on speed or costs. If there are several equal
routes, the route with the lowest value is used.
Range of values: 1 - 254
● Interface
Specify the interface via which the network address of the destination is reached.
This table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Destination Network
Shows the network address of the destination.
● Prefix Length
Shows the prefix length.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
411
Advertisement
Table of Contents
