Destination Match; Next-Hop Filtern - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
5.7.5.3

Destination Match

On this page, you specify whether or not the routing information for a route map is filtered
based on the destination IP address.
Settings
● Route Map (Name/Seq. No.)
Select a route map.
● IP Address
Enter the IPv6 address of the destination on which the filtering is based.
● Prefix Length
Enter the number of left-hand bits belonging to the prefix
The table has the following columns:
● Select
Select the check box in the row to be deleted.
● IP Address
Shows the IPv6 address of the destination.
● Prefix Length
Shows the prefix length.
5.7.5.4

Next-Hop filtern

On this page, you specify whether or not the filtering for a route map will be based on the router
to which the routing information is sent next.
416
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12