Settings
Figure 5-15
● RIPv2
Enable or disable routing using RIPv2.
● Inbound Filter
Select a route map that filters inbound routes.
● Redistribute Routes
Specify which known routes are distributed using RIPv2.
The following types of route exist:
– Static Default
– Connected
– Static
– OSPF
● Route Map
Select a route map that filters which routes are forwarded using RIPv2.
5.6.10.2
Interfaces
Overview
On this page, you can configure RIPv2 interfaces.
Note
RIPv2 is available only on layer 3.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
RIPv2 Configuration
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
393