Siemens SCALANCE XM-400 Configuration Manual page 257

Description of the displayed boxes
The page contains the following boxes:
● Bridge mode
Select the role of the device. The roles are are as follows:
– Customer
– Provider
● VLAN ID
Enter the VLAN ID in the "VLAN ID" input box.
Range of values: 1 ... 4094
The table has the following columns:
● Select
Select the row you want to delete.
● VLAN ID
Shows the VLAN ID. The VLAN ID (a number between 1 and 4094) can only be assigned
once when creating a new data record and can then no longer be changed. To make a
change, the entire data record must be deleted and created again. Up to 257 VLANs can
be defined.
● Name
Enter a name for the VLAN. The name only provides information and has no effect on the
configuration. The length is a maximum of 32 characters.
● Status
Shows the status type of the entry in the internal port filter table. Here, static means that
the address was entered as a static address by the user. The entry GVRP means that the
configuration was registered by a GVRP frame. This is, however, only possible if GVRP
was enabled for the device.
● Private VLAN Type
Shows the type of the PVLAN.
● Primary VLAN ID
, With secondary PVLANs shows the ID of the corresponding primary PVLAN.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
If you operate the device with the "Customer" role, it behaves like a standard IE switch.
If you operate the device with the "Provider" role, in addition to the properties of the
"Customer" role it it provides the option of managing external VLAN tags. With this role
you can use the function Q-in-Q VLAN tunnel.
Configuring with Web Based Management
5.5 The "Layer 2" menu
257