Siemens SCALANCE XM-400 Configuration Manual page 436
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Configuring with Web Based Management
5.7 The "Layer 3 (IPv6)" menu
Description
The page contains the following:
● Interface
Select the IPv6 interface on which OSPFv3 will be enabled.
● Area ID
Select the area ID of the area with which the OSPFv3 interface is connected.
Note
For the secondary interface select the same Area ID as for the corresponding primary
interface.
The information whether a primary or secondary interface is involved can be found in "Layer
3 (IPv6) > Subnets".
This table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Interface
Shows the OSPFv3 interface.
● Area ID
Select the area ID of the area with which the OSPFv3 interface is connected.
● Passive Interface
Specify the behavior of the interface:
– Enabled: No OSPFv3 information (e.g. Hello frames and LSDB updates) is sent via this
– Disabled: OSPFv3 information is sent and learned via this interface.
● Metric
Enter the costs for the OSPFv3 interface.
436
interface and learned.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Advertisement
Table of Contents
