Pim Rps - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.3 The "Information" menu
● Outgoing Interface
Shows the interface via which the multicast will be forwarded.
● Status
Shows whether or not a multicast group is used.
– Forwarding
– Pruned
5.3.13.11

PIM RPs

Samples of the statistics
The page shows information on rendezvous points.
Description of the displayed values
Select which rendezvous points should be displayed.
● Candidate
Shows the interfaces of the device that are candidates for rendezvous points.
● Elected (Designated)
Shows the designated router of the device.
● Static
Shows the static rendezvous points of the device.
Depending on your selection not all columns are displayed in the table.
The table has the following columns:
● Group Address
Shows the address of the multicast group.
● Group Mask
Shows the subnet mask that restricts the multicast band.
128
The multicast group is used.
The multicast group is not used.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12