Siemens SCALANCE XM-400 Configuration Manual page 198

Configuring with Web Based Management
5.4 The "System" menu
● Status
Shows the status of the entry:
– Enabled
– Invalid
● Type
Shows how the daylight saving time changeover is made:
– Date
– Recurring
Procedure
Creating an entry
1. Click the "Create" button.
A new entry is created in the table.
2. Click on the required entry in the "DST No column.
You change to the "DST Configuration" page.
3. Select the required type in the "Type" drop-down list.
Depending on the selected type, various settings are available.
4. Enter a name name in the "Name" box.
5. If you have selected the type "Date", fill in the following boxes.
– Year
– Day (for start and end date)
– Hour (for start and end date)
– Month (for start and end date)
6. If you have selected the type "Recurring", fill in the following boxes.
– Hour (for start and end date)
– Month (for start and end date)
– Week (for start and end date)
– Day (for start and end date)
7. Click the "Set Values" button.
Deleting an entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
198
The entry was created correctly.
The entry was created new and the start and end date are identical.
A fixed date is entered for the daylight saving time changeover.
A rule was defined for the daylight saving time changeover.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12