Ripv2 Statistics - Siemens SCALANCE XM-400 Configuration Manual

Description of the displayed boxes
The table has the following columns:
● Area ID
Shows the ID of the area to which the LSA belongs. If the LSA is an external connection,
'-' is displayed.
● Link State Type
Shows the LSA type. The following values are possible:
– Unknown
– Router
– Network
– NSSA External
– Summary
– AS Summary
– AS External
● Link State ID
Shows the ID of the LSA.
● Router ID
Shows the ID of the router that sent this LSA.
● Sequence Number
Shows the sequence number of the LSA. Each time an LSA is renewed, this sequence
number is incremented by one.
5.3.13.6

RIPv2 Statistics

Overview
This page shows the statistics of the RIP interface.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
LSA type is unknown.
The router LSA (Type 1) is sent by the OSPF router within an area. The LSA contains
information about the status of all router interfaces.
The network LSA (Type 2) is sent by the designated router within an area. The LSA
contains a list of routers connected to the network.
The NSSA external LSA (Type 7) is sent by the NSSA-ASBR within an NSSA. The
NSSA-ASBR receives LSAs of Type 5 and converts the information to LSAs of Type 7.
The NSSA router can forward these LSAs within an NSSA.
The summary LSA (Type 3) is sent by the ABR within an area. The LSA contains
information about routes to other networks.
The AS summary LSA (Type 4) is sent by the area border router within an area. The
LSA contains information about routes to other autonomous systems.
The AS external LSA (Type 5) is sent by the AS border router within an autonomous
system. The LSA contains information about routes from one network to another.
Configuring with Web Based Management
5.3 The "Information" menu
123