Siemens SCALANCE XM-400 Configuration Manual page 230

Configuring with Web Based Management
5.4 The "System" menu
Description of the displayed boxes
The table has the following rows:
● Status
Shows the status of the PLUG. The following are possible:
– ACCEPTED
– NOT ACCEPTED
– NOT PRESENT
– FACTORY
– MISSING
● Device Group
Shows the SIMATIC NET product line that used the C-PLUG or KEY-PLUG previously.
230
There is a PLUG with a valid and suitable configuration in the device.
Invalid or incompatible configuration on the inserted PLUG.
There is no C-PLUG or KEY-PLUG inserted in the device.
PLUG is inserted and does not contain a configuration. This status is also displayed
when the PLUG was formatted during operation.
There is no PLUG inserted. Functions are configured on the device for which a license
is required.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12