Ospfv3 As-Scope Lsdb - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Configuring with Web Based Management
5.3 The "Information" menu
● Trans. Area ID
Shows the ID of the area via which the virtual neighborhood relation exists.
● Hello suppr
Shows the suppressed Hello packets to the neighbor router. This field normally displays
"no".
● Hello Queue
Shows the length of the queue with Hello packets still to be transmitted.
● Events
Shows the number of status changes.
5.3.14.5
OSPFv3 AS-Scope LSDB
Overview
The AS-Scope LSDB consists of AS external LSAs. The most important data of these LSAs
is shown on this page.
Description of the displayed values
The table has the following columns:
● Link State Type
– AS External
● Link State ID
Shows the ID of the LSA.
● Router ID
Shows the ID of the router that sent this LSA.
● Sequence Number
Shows the sequence number of the LSA. Each time an LSA is renewed, this sequence
number is incremented by one.
136
The AS external LSA (Type 0x4005) is sent by the AS border router within an
autonomous system. The LSA contains information about routes from one network to
another.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Advertisement
Table of Contents
