Siemens SCALANCE XM-400 Configuration Manual page 344

Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
● Address Type
Shows the address type. The following values are possible:
– Primary
– Secondary
● Loopback
Shows whether or not the "loopback" property is enabled.
● TIA Interface
Select whether or not this interface should become the TIA Interface.
Steps in configuration
1. Select the interface from the "Interface (name)" drop-down list.
2. Enter a name for the Interface in "Interface Name".
3. Enter the IPv4 address of the subnet in the "IP Address" column.
4. Enter the subnet mask belonging to the IPv4 address in the "Subnet Mask" column
5. Click the "Set Values" button.
344
The first subnet of the interface.
All further subnets of the interface.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12