Ospfv3 Neighbors - Siemens SCALANCE XM-400 Configuration Manual

● OSPF Status
Shows the status of OSPF.
– Enabled: OSPF is enabled on the interface.
– Disabled: OSPF is disabled on the interface.
● Designated Router
Shows the IPv6 address of the designated router for this OSPFv3 interface.
● Backup Designated Router
Shows the IPv6 address of the designated backup router for this OSPFv3 interface.
● Events
Shows the number of status changes of OSPFv3.
5.3.14.3

OSPFv3 Neighbors

Overview
This page shows the dynamically detected neighbor routers in the relevant networks.
Description of the displayed values
The table has the following columns:
● Interface
Displays the OSPFv3 interface via which the neighbor router can be reached.
● Router ID
Shows the ID of the neighbor router.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.3 The "Information" menu
133