Siemens SCALANCE XM-400 Configuration Manual page 329

Industrial ethernet switches

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The page contains the following:

● MLD Snooping

Enable or disable MLD on the device.

● MLD Snooping Aging Time

Enter the time after which entries generated by MLD are deleted from the multicast filter

table. Assuming that this is not updated by a new MLD packet.

This applies to all VLANS; a VLAN-specific configuration is not possible

Table 1 has the following columns:

● 1st column

Shows that the settings are valid for all VLANs of table 2.

● Snooping / Querier

Select the setting. You have the following setting options:

● Copy to Table

If you click the button, the settings are adopted for all ports of table 2.

SCALANCE XM-400/XR-500 Web Based Management (WBM)

Configuration Manual, 05/2017, C79000-G8976-C248-12

The function is enabled.

The function is disabled.

Table 2 remains unchanged.

Configuring with Web Based Management

5.5 The "Layer 2" menu

Scalance xm-500