Siemens SCALANCE XM-400 Configuration Manual page 142

Configuring with Web Based Management
5.3 The "Information" menu
● Identification method
Shows the method according to which the DHCP client is identified.
● Identification value
Shows the MAC address ot he client ID of the DHCP client.
● Remote ID
Shows the remote ID of the DHCP client.
● Circuit ID
Shows the circuit ID of the DHCP client.
● Allocation Method
Shows whether the IPv4 address was assigned statically or dynamically. You configure the
static entries in "System > DHCP > Static Leases".
● Binding State
Shows the status of the assignment.
– Assigned
– Not used
– Probing
– Unknown
● Expire Time
Shows until when the assigned IPv4 address is still valid. Up to this time, the DHCP client
must either request a new IPv4 address or extend the lease time of the assigned IPv4
address.
Description of the buttons and input boxes
"Show all" button
Click this button to display all the entries on the WBM page. Note that displaying all messages
can take some time.
"Next" button
Click this button to go to the next page.
"Prev" button
Click this button to go to the previous page.
Drop-down list for page change
From the drop-down list, select the page you want to go to.
"Refresh" button
Refreshes the display of the values in the table.
142
The assignment is used.
The assignment is not used.
The assignment is being checked.
The status of the assignment is unknown.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12