Dhcp Relay Agent; General - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Settings
Figure 5-14
● Route Map (Name/Seq. No.)
Select a route map.
The table has the following columns:
● Select
Select the row you want to delete.
● Name
Shows the name of the route map.
● Sequence Number
Shows the sequence number of the route map.
● Metric
Enter the new value for the metric with which the routing information will be forwarded.
● Tag
Enter the new value for the tag with which the routing information will be forwarded.
5.6.6
DHCP Relay Agent
5.6.6.1
General
DHCP Relay Agent
If the DHCP server is in a different network than the DHCP client, the client cannot reach the
server. The DHCP relay agent intercedes between the DHCP server and DHCP client.
If you configure option 82, the DHCP relay agent expands the packets to the DHCP server by
a circuit ID and a remote ID.
You can specify up to 4 DHCP servers for the DHCP relay agent. If a DHCP server is
unreachable, the device can switch to a different DHCP server.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Route maps set
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
359
Advertisement
Table of Contents
