Addresses Overview; Addresses Configuration - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
5.6.8.3
Addresses Overview
Overview
This page shows which IPv4 addresses the virtual router monitors. Each virtual router can
monitor a maximum of 10 IPv4 addresses.
Note
This function is available only with layer 3.
Description of the displayed values
The table has the following columns:
● Interface
Shows the Interface that functions as the virtual router.
● VRID
Shows the ID of this virtual router.
● Number of Addresses
Shows the number of IPv4 addresses.
● Associated IP Address (1) ...Associated IP Address (10)
Shows the router IPv4 addresses monitored by this virtual router. If a router takes over the
role of master, the routing function is taken over by this router for all these IPv4 addresses.
5.6.8.4
Addresses Configuration
Creating or changing the monitored IP addresses
On this page, you can create, modify or delete the IPv4 addresses to be monitored. A maximum
of 10 IPv4 addresses can be monitored by a virtual router.
Note
This function is available only with layer 3.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
377
Advertisement
Table of Contents
