Configuration - Siemens SCALANCE XM-400 Configuration Manual

5.6.2.2

Configuration

On this page, you configure the IPv4 interface.
Description of the displayed values
The page contains the following boxes:
● Interface (name)
Select the interface from the drop-down list.
● Interface Name
Enter the name of the interface.
● MAC Address
Displays the MAC address of the selected interface.
● DHCP
Enable or disable the DHCP client for this IPv4 interface.
Note
If you want to operate the device as a router with several interfaces, disable DHCP on all
interfaces.
● IP Address
Enter the IPv4 address of the interface. The IPv4 addresses must not be used more than
once.
● Subnet Mask
Enter the subnet mask of the subnet you are creating. Subnets on different interfaces must
not overlap.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
343