Static - Siemens SCALANCE XM-400 Configuration Manual

6. Select the "NAT" check box on this tab.
7. Click the "Set Values" button.
5.6.3.2

Static

On this WBM page, you configure static 1:1 address translations.
You specify which inside global address the inside local address of a device will be converted
to and vice versa. This variant allows connection establishment in both directions. The device
in the internal network can be reached from the external network.
Description
The page contains the following boxes:
● Interface
Select the a NAT interface from the drop-down list for which you want to create further NAT
configurations.
● Inside Local Address
Enter the actual address of the device that should be reachable from external.
● Inside Global Address
Enter the address at which the device can be reached from external.
The table has the following columns:
● 1st column
Select the check box in the row to be deleted.
● Interface
NAT interface to which the setting relates.
● Inside Local Address
Shows the actual address of the device that should be reachable from external.
● Inside Global Address
Shows the address at which the device can be reached from external.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
347