Ospfv3 Virtual Neighbors - Siemens SCALANCE XM-400 Configuration Manual

5.3.14.4

OSPFv3 Virtual Neighbors

Overview
This page shows the configured virtual neighbors.
Description of the displayed values
The table has the following columns:
● Interface
Displays the OSPFv3 interface via which the neighbor router can be reached.
● Router ID
Shows the ID of the virtual neighbor router.
● Status
Shows the status of the virtual neighbor router. The status can adopt the following values:
– unknown
– down
– attempt und init
– two-way
– exchangestart, exchange und loading
– full
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Status of the neighbor router is unknown.
The neighbor router cannot be reached.
Short-lived status during initialization
Two-way receipt of Hello packets. Specification of the designated router and the
designated backup router.
Status during exchange of the LSAs
The database is complete and synchronized within the area. The routes can now be
detected.
Note
Normal status
If the partner router is a designated router or a designated backup router, the status is
"full". Otherwise the status is "two-way".
Configuring with Web Based Management
5.3 The "Information" menu
135