Napt - Siemens SCALANCE XM-400 Configuration Manual

The table has the following columns:
● 1st column
Select the check box in the row to be deleted.
● Interface
NAT interface to which the setting relates.
● Inside Global Address
Shows the start address for the dynamic assignment of addresses at which devices will be
reachable from external.
● Inside Local Address Mask
Shows the address mask of the external subnet.
Procedure
To create a dynamic address translation, proceed as follows:
1. Select the a NAT interface from the "Interface" drop-down list:
2. In "Inside Global Address" enter the start address for the dynamic assignment of addresses
at which devices will be reachable from external.
3. In "Inside Global Address Mask" enter the address mask of the external subnet.
5.6.3.4

NAPT

On this WBM page, you configure static port translations.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
349