Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
6. Select the required entry from the "Circuit ID Type" drop-down list.
– Predefined
– Free Number
7. Click the "Set Values" button.
5.6.7
VRRP
5.6.7.1
Router
Introduction
Using the "Create" button, you can create new virtual routers. A maximum of 52 Virtual routers
can be configured. You can configure other parameters on the "Configuration" tab.
Note
● This function is available only with layer 3.
● Select the "VRRP" check box to configure VRRP.
● Simultaneous operation of VRRP and VRRPv3 is not possible.
● You can only use VRRP in conjunction with VLAN interfaces. Router ports are not
supported.
364
The router index is added to the generated Circuit ID.
Enter the ID in "Circuit ID".
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12