Pim Routes - Siemens SCALANCE XM-400 Configuration Manual

5.3.13.10

PIM Routes

Overview
The page shows the PIM routing table.
Description of the displayed values
Select which PIM routes should be displayed.
● All
● Outgoing
Depending on your selection not all columns are displayed in the table.
The table has the following columns:
● Group Address
Shows the address of the multicast group.
● Group Mask
Shows the subnet mask that restricts the multicast band.
● Source Address
– IP Address
– *
● Incoming Interface
Shows the interface via which the multicast will be received.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Shows the source IP address of the multicast packet.
(*,G) messages contain the group and the information to pass on the message in the
direction of the RP.
The route is via the RP.
Configuring with Web Based Management
5.3 The "Information" menu
127