Interface Authentication - Siemens SCALANCE XM-400 Configuration Manual

5.6.9.5

Interface Authentication

Configuring the interface authentication
On this page, you define the authentication of the interface.
Description of the displayed boxes
The page contains the following boxes:
● OSPF interface
Select the OSPFv2 interface for which you want to configure authentication.
● Authentication Type
Select the authentication method. You have the following options:
– None
– Simple
– MD5
Section "Simple Authentication"
● Password
Enter a password.
● Confirmation
Confirm the entered password.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
No authentication
Authentication using an unencrypted password
Authentication using MD5
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
387