Agent Ip; Dns - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.4 The "System" menu
Description
The page contains the following boxes. These are purely information boxes with a maximum
length of 32 characters.
● "Latitude" input box
Geographical latitude: Here, enter the value for the northerly or southerly latitude of the
location of the device.
For example, the value +49° 1´31.67" means that the device is located at 49 degrees, 1
arc minute and 31.67 arc seconds northerly latitude.
A southerly latitude is shown by a preceding minus character.
You can also append the letters N (northerly latitude) or S (southerly latitude) to the numeric
information (49° 1´31.67" N).
● "Longitude" input box
Geographic longitude: Here, you enter the value of the eastern or western longitude of the
location of the device.
The value +8° 20´58.73" means that the device is located at 8 degrees, 20 minutes and
58.73 seconds east.
A western longitude is indicated by a preceding minus sign.
You can also add the letter E (easterly longitude) or W (westerly longitude) to the numeric
information (8° 20´58.73" E).
● Input box: "Height"
Height Here, you enter the value of the geographic height above sea level in meters.
For example, 158 m means that the device is located at a height of 158 m above sea level.
Heights below sea level (for example the Dead Sea) are indicated by a preceding minus
sign.
Procedure
1. Enter the calculated latitude in the "Latitude" input box.
2. Enter the calculated longitude in the "Longitude" input box.
3. Enter the height above sea level in the "Height" input box.
4. Click the "Set Values" button.
5.4.3

Agent IP

Here, you specify the IP configuration for the device.
With devices with more than one IP interface, this call references the "Subnets > Configuration"
menu item in the "Layer 3" menu and the configuration of the TIA interface there.
5.4.4

DNS

On this page, you can manuall configure up to 3 DNS servers with IPv4 or IPv6 addresses.
Manually configured DNS servers are each assigned an index from 1 to 3. Using DHCP the
IE switch can learn 2 DNS servers with IPv4 addresses. Learned DNS servers are
automatically assigned an index from 6 to 7.
154
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12