C79000-G8976-C248 - Siemens SCALANCE XM-400 Configuration Manual

Introduction
1.1 Information on this configuration manual
Orientation in the documentation
Apart from this configuration manual, the products also have the following documentation:
● Configuration Manual:
– SCALANCE XM-400/XR-500 Command Line Interface (CLI)
This document contains the CLI commands that are supported by the IE switches
SCALANCE XM-400 and SCALANCE XR-500.
● Operating instructions:
– SCALANCE XR-500
– MM900 media modules for SCALANCE XR-500M
– Fan unit FAN597-1 for SCALANCE XR-500M
– Power supply PS598-1 for SCALANCE XR-500M
– SCALANCE XM-400
– Extender for SCALANCE XM-400
– Pluggable transceiver SFP/SFP+/SCP/STP
– PoE power supply SCALANCE PS9230 PoE / SCALANCE PS924 PoE
These documents contain information on installing and connecting up and approvals for
the products.
The following documentation is also available from SIMATIC NET on the topic of Industrial
Ethernet:
● System manual "Industrial Ethernet / PROFINET"
● System manual "Industrial Ethernet / PROFINET - Passive network components"
All these documents are available on the SCALANCE X DVD.
Terms used
The designation . . .
IE switch
IPv4 address
IPv6 address
IP address
IPv4 interface
IPv6 interface
IP interface
12
stands for . . .
Industrial Ethernet switch
IPv4 address
IPv6 address
IPv4/IPv6 address
Interface that supports IPv4.
Interface that supports IPv6. The interface can have more than one IPv6
address The IPv6 addresses have different ranges (scope), e.g. link local
Interface that supports both IPv4 and IPv6. As default the IPv4 support
is already activated. The IPv6 support needs to be activated extra.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12