Ospfv2 Interfaces - Siemens SCALANCE XM-400 Configuration Manual

● Interface
Shows the interface for this route.
● Metric
Shows the metric of the route. The higher value, the longer packets require to their
destination.
● Routing Protocol
Shows the routing protocol from which the entry in the routing table originates. The following
entries are possible:
– Connected: Connected routes
– Static: Static routes
– RIP: Routes via RIP
– OSPF: Routes via OSPF
– Other: Other routes
5.3.13.2

OSPFv2 Interfaces

Overview
This page shows the configuration of the OSPF interface.
Description of the displayed values
The table has the following columns:
● IP address
Shows the IPv4 address of the OSPF interface
● Area ID
Shows the area ID to which the OSPF interface belongs.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.3 The "Information" menu
117