The table has the following columns:
● Rule Number
Shows the number of the protocol rule. When you create a rule, a new row with a unique
number is created.
● Protocol
Select the protocol for which this rule is valid.
● Protocol Number
Enter a protocol number to define further protocols.
This box can only be edited if you have set "Other Protocol" for the protocol .
● Source Port Min.
Enter the lowest possible port number of the source port.
This box can only be edited if you have set "TCP" or "UDP"" for the protocol.
● Source Port Max.
Enter the highest possible port number of the source port.
This box can only be edited if you have set "TCP" or "UDP" for the protocol.
● Dest. Port Min.
Enter the lowest possible port number of the destination port.
This box can only be edited if you have set "TCP" or "UDP" for the protocol.
● Dest. Port Max.
Enter the highest possible port number of the destination port.
This box can only be edited if you have set "TCP" or "UDP" for the protocol.
● Message Type
Enter a message type to decide the format of the message.
This box can only be edited if you have set "ICMP" for the protocol.
● Message Code
Enter a message code to specify the function of the message.
This box can only be edited if you have set "ICMP" for the protocol.
● DSCP
Enter a value for classifying the priority.
This box cannot be edited if you have set "ICMP" for the protocol.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.8 The "Security" menu
471