Siemens SCALANCE XM-400 Configuration Manual page 336

Configuring with Web Based Management
5.5 The "Layer 2" menu
Settings
● RMON
If you select this check box, Remote Monitoring (RMON) allows diagnostics data to be
collected on the device, prepared and read out using SNMP by a network management
station that also supports RMON. This diagnostic data, for example port-related load trends,
allow problems in the network to be detected early and eliminated.
Note
If you disable RMON, these statistics are not deleted but retain their last status.
● Port
Select the ports for which statistics will be displayed.
The table has the following columns:
● Select
Select the row you want to delete.
● Port
Shows the ports for which statistics will be displayed.
Steps in configuration
Enabling the function
1.
Select the "RMON" check box.
2.
Click the "Set Values" button.
The "RMON" function is enabled.
336
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12