Siemens SCALANCE XM-400 Configuration Manual page 271
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Examples:
● An end device in the secondary PVLAN is configured as DHCP client. A remote DHCP
server is set up. A PVLAN switch is configured as DHCP relay agent. Configure an IP
interface in the primary PVLAN of the DHCP relay agent. Assign the secondary PVLANs
containing DHCP clients to this IP interface.
● A PVLAN switch is configured as router. Configure an IP interface in the primary PVLAN
of the router. Assign the secondary PVLANs containing end devices that use the router as
a gateway to this IP interface.
Description of the displayed boxes
The page contains the following boxes:
● Interface
Select the primary PVLAN with an IP interface.
● Secondary VLAN ID
Select a secondary VLAN ID from which the IP interface of the primary PVLAN will be
reachable.
The table has the following columns:
● Select
Select the row you want to delete.
● Interface
Shows the IP interface.
● Secondary VLAN-ID
Shows the secondary VLAN-ID of the secondary PVLAN from which the IP interface of the
primary PVLAN is reachable.
Steps in configuration
1. Create an IP interface for the primary PVLAN.
2. Select the primary PVLAN with an IP interface.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.5 The "Layer 2" menu
271
Advertisement
Table of Contents
