Http - Siemens SCALANCE XM-400 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
File type
EDS
Firmware
GSDML
HTTPSCert
LogFile
MIB
RunningCLI
Script
StartupInfo
Users
WBMFav
5.4.6.1
HTTP
Loading and saving data via HTTP
The WBM allows you to store device data in an external file on your client PC or to load such
data from an external file from the client PC to the devices. This means, for example, that you
can also load new firmware from a file located on your client PC.
Note
This WBM page is available both for connections using HTTP and for connections using
HTTPS.
Firmware
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Description
Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the EtherNet/IP mode
The firmware is signed and encrypted. This ensures that only firmware created
by Siemens can be downloaded to the device.
PROFINET information on the device properties
Default HTTPS certificates including key
The preset and automatically created HTTPS certificates are self-signed.
We strongly recommend that you create your own HTTPS certificates and make
them available. We recommend that you use HTTPS certificates signed either
by a reliable external or by an internal certification authority. The HTTPS certifi‐
cate checks the identity of the device and controls the encrypted data exchange.
Certificates with a different format cannot be copied in.
File with entries from the event log table
Private MSPS MIB file
Text file with CLI commands
This file contains an overview of the current configuration in the form of CLI
commands. Passwords are masked in this file as follows: [PASSWORD]
You can download the text file. The file is not intended to be uploaded again
unchanged.
Text file with CLI commands
You can upload a script file in a device. The CLI commands it contains are
executed appropriately.
Startup log file
This file contains the messages that were entered in the log during the last start‐
up.
This file contains the assignment of the user names to the corresponding pass‐
words.
WBM favorite pages
This file contains the favorites that you created in the WBM.. You can download
this file and upload it in other devices.
Configuring with Web Based Management
5.4 The "System" menu
159
Advertisement
Table of Contents
