Configuring with Web Based Management
5.5 The "Layer 2" menu
The table has the following columns:
● Select
Select the row you want to delete.
● Protocol Value
Shows the protocol value.
● Group Identifier
Shows the group ID.
Steps in configuration
Adding an entry
1. Enter the protocol value in the "Protocol Value" input box.
2. Enter the ID for the group in the Group Identifier input box.
3. Click the "Create" button. A new entry is generated in the table.
4. Click the "Set Values" button.
Deleting an entry
1. On the "Protocol-based VLAN port" tab, check that the protocol group is not used at any
port.
2. Select the check box in the row to be deleted.
3. Click the "Delete" button.
4. Click the "Set Values" button.
5.5.4.5
Protocol-based VLAN port
Introduction
On this page, you specify which protocol and which VLAN is assigned to the individual port.
264
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12